Enter your zip code below to calculate your estimated total price. Total price may
change at checkout based on shipping and billing information entered.
Link activity, port transmission speed, port duplex mode, power, link OK, system
Expansion / Connectivity
Interfaces
24 x 10Base-T/100Base-TX - RJ-45 ¦ 2 x 10Base-T/100Base-TX/1000Base-T - RJ-45
Power
Power Device
Power supply - internal
Voltage Required
AC 120/230 V ( 50/60 Hz )
Power Consumption Operational
28 Watt
Miscellaneous
Width
17.5 in
Depth
9.3 in
Height
1.7 in
Weight
8 lbs
Rack Mounting Kit
Optional
MTBF
407,707 hour(s)
Compliant Standards
TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, VCCI Class A ITE, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A
Software / System Requirements
Software Included
Cisco LAN Base software
Manufacturer Warranty
Service & Support
Limited lifetime warranty
Service & Support Details
Limited warranty - lifetime
Environmental Parameters
Min Operating Temperature
23 °F
Max Operating Temperature
104 °F
Humidity Range Operating
10 - 95% (non-condensing)
Min Storage Temperature
-13 °F
Max Storage Temperature
158 °F
Humidity Range Storage
10 - 95% (non-condensing)
Main Features
Cisco Catalyst 2960 Series Intelligent Ethernet Switches are a new family of fixed-configuration standalone devices that provide desktop 10/100 Fast Ethernet and 10/100/1000 Gigabit Ethernet connectivity for entry-level enterprise, mid-market, and branch office networks to enable enhanced LAN services. The Catalyst 2960 Series offers integrated security, including network admission control (NAC), advanced quality of service (QoS), and resiliency to deliver intelligent services for the network edge.
Features and Benefits:
– Intelligent features at the network edge, such as sophisticated access control lists (ACLs) and enhanced security – Dual-purpose uplinks for Gigabit Ethernet uplink flexibility, allowing use of either a copper or a fiber uplink-each dual-purpose uplink port has one 10/100/1000 Ethernet port and one Small Form-Factor Pluggable (SFP)-based Gigabit Ethernet port, with one port active at a time – Network control and bandwidth optimization using advanced QoS, granular rate limiting, ACLs, and multicast services – Network security through a wide range of authentication methods, data encryption technologies, and network admission control based on users, ports, and MAC addresses – Easy network configuration, upgrades, and troubleshooting using Cisco Network Assistant software – Auto-configuration for specialized applications using Smartports – Entry-level enterprise-class intelligent services – LAN Base Image installed
Technical Specifications:
Performance
32 Gbps switching fabric
Forwarding bandwidth: 4.4 Gbps
Forwarding rate based on 64-byte packets: 6.5 Mpps
64 MB DRAM
32 MB flash memory
Configurable up to 8000 MAC addresses
Configurable up to 255 IGMP groups
Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (Jumbo frames) for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging of Multiprotocol Label Switching (MPLS) tagged frames on both 10/100 and 10/100/1000 ports.
Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex
System status LEDs: system, RPS, link status, link duplex, link speed
Power Connectors Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 675. The connectors are located at the back of the switch.
Internal-Power-Supply Connector
The internal power supply is an autoranging unit.
The internal power supply supports input voltages between 100 and 240VAC.
Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
Cisco RPS Connector
The connector offers connection for an optional Cisco RPS 675 that uses AC input and supplies DC output to the switch.
The connector offers a 675W redundant power system that supports up to six external network devices and provides power to one failed device at a time.
The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic.
Only the Cisco RPS 675 (model PWR675-AC-RPS-N1=) should be attached to the redundant-power-supply receptacle.
Product Specifications:
– Device Type Switch
– Enclosure Type External - 1U
– Interfaces 24 x network - Ethernet 10Base-T/100Base-TX - RJ-45 2 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
– Flash Memory 32 MB flash
– RAM 64 MB
– Authentication Method Secure Shell v.2 (SSH2)
– Compliant Standards CE, UL, TUV GS, CISPR 24, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024, UL 60950, CISPR 22, FCC Part 15, MIC, AS/NZS 3548
