Cisco Small Business Managed Switch SFE2010 - switch - 48 ports - managed - rack-mountable

The Linksys WebView Managed Switch allows you to expand your network securely. Configuration of the switch is secured using SSL for web access. SFE2010P is optimized for maximizing the system availability with fully redundant stacking, redundant power options, and dual images for resilient firmware upgrades. The switch is able to secure the network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, Access Control Lists (ACL), DOS prevention, and MAC-based filtering. The enhanced QoS and traffic management features ensure clear and reliable voice and video communications. For wireless or VoIP deployments, the SFE2010P supports the IEEE 802.3af standard for Power over Ethernet (PoE). With automatic load sensing, the power control circuitry automatically detects PoE on the end-device before providing power. For safety, each port has independent overload and short-circuit protection, along with LED indicators for power status. 15 W of POE power is available on up to 24 of the FE ports for powering PoE enabled wireless AP or VoIP handsets, with a maximum per device PoE delivery of 360 watt available for all ports. The SFE2010P switches provide resilient stacking for up to 4 units or 192 ports. A stack of units is managed as a single switch with one web management interface to manage all the units. SFE2010P can coexist in a stack with other supported Linksys switches for a maximum of 192 ports in a stack. The stacking functionality includes master / backup unit behavior, ring and chain architecture, hot insertion and removal of units. The switches provide an intuitive, secure management interface enabling you to better utilize the comprehensive feature-set of the SFE2010P, resulting in a better optimized, more secure network. Software running on the SFE2010P Ethernet Switch interacts with provisioning, management, and security software on the site's services router and interacts further upstream to the service provider. This interaction provides a simple, one-step installation and access to web-administered features for the administrator and users. Simple, affordable network operations throughout the network's lifetime are the result.

Product Details:

– Device Type
Switch - stackable

– Enclosure Type
Rack-mountable - 1U

– Expansion Slots Total (Free)
2 ( 2 ) x SFP (mini-GBIC)

– Interfaces
48 x network / power - Ethernet 10Base-T/100Base-TX - RJ-45 2 x network host - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 1 x management - console

– Authentication Method
Secure Shell (SSH), RADIUS

– Cables Included
1 x serial cable

– Compliant Standards
CE, UL 60950, CSA C22.2, FCC CFR47 Part 15

– Encryption Algorithm
MD5

– Rack Mounting Kit
Included

– Network Auxiliary Network Ports
2x10/100/1000Base-T

– Communication Mode
Half-duplex, full-duplex

– Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s

– Connectivity Technology
Wired

– Data Link Protocol
Ethernet, Fast Ethernet

– Data Transfer Rate
100 Mbps

– Features
Auto-sensing per device, DHCP support, auto-negotiation, BOOTP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, port mirroring, Weighted Round Robin (WRR) queuing, MAC address filtering, Broadcast Storm Control, IPv6 support, firmware upgradable, SNTP support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support

– MAC Address Table Size
8K entries

– Max Units In A Stack
4

– Ports Qty
48 x Ethernet 10Base-T, Ethernet 100Base-TX

– Remote Management Protocol
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, SSH

– Routing Protocol
IGMPv2, IGMP

– Status Indicators
Link activity, port transmission speed, power, link OK, Unit ID

– Switching Protocol
Ethernet

– Power Features
Redundant Power System (RPS) connector

– Power Device
Power supply - internal

– Power Over Ethernet (PoE)
Yes

– Voltage Required
AC 120/230 V ( 50/60 Hz )